R407F, R-407F, Refrigerant, 5 Lb. Tank, Zeotropic HFC Blend, Low Medium Temp KIT

Description

Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
R407F, R-407F, Refrigerant, 5 Lb. Tank, Zeotropic HFC Blend, Low Medium Temp KIT
(1) 5 lbs. Of R-407F
(1) 36" Charging Hose
(1) Envirosafe ProSealXL4 Injector
*This will screw onto the suction service port (Larger Line).
Connect the charging hose
coming
from the refrigerant can to the
injector
.
Added the refrigerant that will push the product in as need to fully charge the system.
Envirosafe PSXL4 Injector
One of our most requested products, Enviro-Safe® ProSeal Xl4 Inject with is a small, concentrated, easy inject refrigerant leak sealant.
ProSeal XL4 Inject is compatible with all refrigerants except ammonia. This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.
Enviro-Safe™ has been producing and packaging sealants for over 17 years. Our Sealant Injector hose was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014.
Unlike most other products on the market, ProSeal XL4 Inject travels with the gas, which makes it faster, and more effective at finding leaks.
ProSeal XL4 Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets. Sealing leaks will save energy and lower refrigerant emissions.
Forms a hard seal on metal, schrader valves,
O-rings
, gaskets, a/c condensers, evaporators, line sets and solder joints
Even though Proseal XL4 can form a seal on the schrader valve, when you hook up to it the seal will release and allow you to use the schrader if necessary.
If there is still Proseal XL4 in the system it will reseal the schrader.
This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.
Applications: heat pumps, split systems & mini split units, packaged units, and microchannel coils
DO NOT use in ammonia systems
One-time use
Concentrated
No need to pump-down R410 or other units
No injection-hose or caulk-gun needed
Concentrated formula means less material in the system
R407F Refrigerant, 5 Lb. Tank, Zeotropic HFC Blend, Low & Medium Temperature
R407F is a HFC blend, used as a replacement for R22 and R404A in low and medium temperature applications.
With a lower Global Warming Potential (GWP) and higher efficiency compared to R404A and R407A, R407F is a great alternative for various commercial refrigeration applications
Product Features and Benefits
Substitute for R22, R502, R404A and R407A
Zeotropic refrigerant blend containing R32, R125 and R134a
Refrigerant must be charged from the liquid phase to ensure accurate composition
A‑Gas refrigerant cylinders have dual port valves, making liquid offtake easier
Non-flammable with a safety classification of A1
Compressors must be charged with polyolester oils, contact the compressor manufacturer for more information
Systems using R407F can consume up to 15% less energy than systems using R404A
Use of R407F can reduce CO2 emissions by up to 40%
Can be retrofitted into existing systems and used for new installations, please contact A‑Gas for more information
Be aware of the high discharge temperature at low temperature applications. Discharge temperature mitigation may be required
You must be certified by the (EPA), Section 608 or Section 609 to purchase this item.
You must show proof of certification before paying and before the item is shipped.
*If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same.
Thank you.
SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada.
The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including "ORMD" Limited Quantities Exemption shipments.
You must be certified by the (EPA), Section 608 or Section 609 to purchase this item.
You must show proof of certification before paying and before the item is shipped.
*If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same.
Thank you.
SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada.
The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including "ORMD" Limited Quantities Exemption shipments.
(1) 5 lbs. Of R-407F (1) 36" Charging Hose (1) Envirosafe ProSealXL4 Injector *This will screw onto the suction service port (Larger Line). Connect the charging hose coming from the refrigerant can to the injector. Added the refrigerant that will push the product in as need to fully charge the system. Envirosafe PSXL4 Injector One of our most requested products, Enviro-Safe® ProSeal Xl4 Inject with is a small, concentrated, easy inject refrigerant leak sealant. ProSeal XL4 Inject is compatible with all refrigerants except ammonia. This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units. Enviro-Safe™ has been producing and packaging sealants for over 17 years. Our Sealant Injector hose was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014. ---Unlike most other products on the market, ProSeal XL4 Inject travels with the gas, which makes it faster, and more effective at finding leaks. ---ProSeal XL4 Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets. Sealing leaks will save energy and lower refrigerant emissions. ---Forms a hard seal on metal, schrader valves, O-rings, gaskets, a/c condensers, evaporators, line sets and solder joints ---Even though Proseal XL4 can form a seal on the schrader valve, when you hook up to it the seal will release and allow you to use the schrader if necessary. ---If there is still Proseal XL4 in the system it will reseal the schrader. ---This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units. ---Applications: heat pumps, split systems & mini split units, packaged units, and microchannel coils ---DO NOT use in ammonia systems ---One-time use ---Concentrated ---No need to pump-down R410 or other units ---No injection-hose or caulk-gun needed ---Concentrated formula means less material in the system R407F Refrigerant, 5 Lb. Tank, Zeotropic HFC Blend, Low & Medium Temperature R407F is a HFC blend, used as a replacement for R22 and R404A in low and medium temperature applications. ---With a lower Global Warming Potential (GWP) and higher efficiency compared to R404A and R407A, R407F is a great alternative for various commercial refrigeration applications Product Features and Benefits Substitute for R22, R502, R404A and R407A ---Zeotropic refrigerant blend containing R32, R125 and R134a ---Refrigerant must be charged from the liquid phase to ensure accurate composition ---A‑Gas refrigerant cylinders have dual port valves, making liquid offtake easier ---Non-flammable with a safety classification of A1 ---Compressors must be charged with polyolester oils, contact the compressor manufacturer for more information ---Systems using R407F can consume up to 15% less energy than systems using R404A ---Use of R407F can reduce CO2 emissions by up to 40% ---Can be retrofitted into existing systems and used for new installations, please contact A‑Gas for more information ---Be aware of the high discharge temperature at low temperature applications. Discharge temperature mitigation may be required You must be certified by the (EPA), Section 608 or Section 609 to purchase this item. You must show proof of certification before paying and before the item is shipped. *If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same. Thank you. SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada. The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including "ORMD" Limited Quantities Exemption shipments.
Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
R407F, R-407F, Refrigerant, 5 Lb. Tank, Zeotropic HFC Blend, Low Medium Temp KIT
(1) 5 lbs. Of R-407F
(1) 36" Charging Hose
(1) Envirosafe ProSealXL4 Injector
*This will screw onto the suction service port (Larger Line).
Connect the charging hose
coming
from the refrigerant can to the
injector
.
Added the refrigerant that will push the product in as need to fully charge the system.
Envirosafe PSXL4 Injector
One of our most requested products, Enviro-Safe® ProSeal Xl4 Inject with is a small, concentrated, easy inject refrigerant leak sealant.
ProSeal XL4 Inject is compatible with all refrigerants except ammonia. This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.
Enviro-Safe™ has been producing and packaging sealants for over 17 years. Our Sealant Injector hose was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014.
Unlike most other products on the market, ProSeal XL4 Inject travels with the gas, which makes it faster, and more effective at finding leaks.
ProSeal XL4 Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets. Sealing leaks will save energy and lower refrigerant emissions.
Forms a hard seal on metal, schrader valves,
O-rings
, gaskets, a/c condensers, evaporators, line sets and solder joints
Even though Proseal XL4 can form a seal on the schrader valve, when you hook up to it the seal will release and allow you to use the schrader if necessary.
If there is still Proseal XL4 in the system it will reseal the schrader.
This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.
Applications: heat pumps, split systems & mini split units, packaged units, and microchannel coils
DO NOT use in ammonia systems
One-time use
Concentrated
No need to pump-down R410 or other units
No injection-hose or caulk-gun needed
Concentrated formula means less material in the system
R407F Refrigerant, 5 Lb. Tank, Zeotropic HFC Blend, Low & Medium Temperature
R407F is a HFC blend, used as a replacement for R22 and R404A in low and medium temperature applications.
With a lower Global Warming Potential (GWP) and higher efficiency compared to R404A and R407A, R407F is a great alternative for various commercial refrigeration applications
Product Features and Benefits
Substitute for R22, R502, R404A and R407A
Zeotropic refrigerant blend containing R32, R125 and R134a
Refrigerant must be charged from the liquid phase to ensure accurate composition
A‑Gas refrigerant cylinders have dual port valves, making liquid offtake easier
Non-flammable with a safety classification of A1
Compressors must be charged with polyolester oils, contact the compressor manufacturer for more information
Systems using R407F can consume up to 15% less energy than systems using R404A
Use of R407F can reduce CO2 emissions by up to 40%
Can be retrofitted into existing systems and used for new installations, please contact A‑Gas for more information
Be aware of the high discharge temperature at low temperature applications. Discharge temperature mitigation may be required
You must be certified by the (EPA), Section 608 or Section 609 to purchase this item.
You must show proof of certification before paying and before the item is shipped.
*If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same.
Thank you.
SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada.
The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including "ORMD" Limited Quantities Exemption shipments.
You must be certified by the (EPA), Section 608 or Section 609 to purchase this item.
You must show proof of certification before paying and before the item is shipped.
*If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same.
Thank you.
SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada.
The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including "ORMD" Limited Quantities Exemption shipments.
(1) 5 lbs. Of R-407F
(1) 36" Charging Hose
(1) Envirosafe ProSealXL4 Injector
*This will screw onto the suction service port (Larger Line).
Connect the charging hose
coming
from the refrigerant can to the
injector
.
Added the refrigerant that will push the product in as need to fully charge the system.
Envirosafe PSXL4 Injector
One of our most requested products, Enviro-Safe® ProSeal Xl4 Inject with is a small, concentrated, easy inject refrigerant leak sealant.
ProSeal XL4 Inject is compatible with all refrigerants except ammonia. This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.
Enviro-Safe™ has been producing and packaging sealants for over 17 years. Our Sealant Injector hose was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014.
Unlike most other products on the market, ProSeal XL4 Inject travels with the gas, which makes it faster, and more effective at finding leaks.
ProSeal XL4 Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets. Sealing leaks will save energy and lower refrigerant emissions.
Forms a hard seal on metal, schrader valves,
O-rings
, gaskets, a/c condensers, evaporators, line sets and solder joints
Even though Proseal XL4 can form a seal on the schrader valve, when you hook up to it the seal will release and allow you to use the schrader if necessary.
If there is still Proseal XL4 in the system it will reseal the schrader.
This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.
Applications: heat pumps, split systems & mini split units, packaged units, and microchannel coils
DO NOT use in ammonia systems
One-time use
Concentrated
No need to pump-down R410 or other units
No injection-hose or caulk-gun needed
Concentrated formula means less material in the system
R407F Refrigerant, 5 Lb. Tank, Zeotropic HFC Blend, Low & Medium Temperature
R407F is a HFC blend, used as a replacement for R22 and R404A in low and medium temperature applications.
With a lower Global Warming Potential (GWP) and higher efficiency compared to R404A and R407A, R407F is a great alternative for various commercial refrigeration applications
Product Features and Benefits
Substitute for R22, R502, R404A and R407A
Zeotropic refrigerant blend containing R32, R125 and R134a
Refrigerant must be charged from the liquid phase to ensure accurate composition
A‑Gas refrigerant cylinders have dual port valves, making liquid offtake easier
Non-flammable with a safety classification of A1
Compressors must be charged with polyolester oils, contact the compressor manufacturer for more information
Systems using R407F can consume up to 15% less energy than systems using R404A
Use of R407F can reduce CO2 emissions by up to 40%
Can be retrofitted into existing systems and used for new installations, please contact A‑Gas for more information
Be aware of the high discharge temperature at low temperature applications. Discharge temperature mitigation may be required
You must be certified by the (EPA), Section 608 or Section 609 to purchase this item.
You must show proof of certification before paying and before the item is shipped.
*If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same.
Thank you.
SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada.
The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including "ORMD" Limited Quantities Exemption shipments.