Used 1996 Harrison M550 Geared Head Lathe 5M00361028

Description

Selling a used 1996 Harrison M550 Gap Bed Centre Lathe, is equipped with a 2 axis Analam DRO.
It operate perfectly, All Accessories come with Purchase!!!
Specifications:
CENTER:
CENTERS: 280MM (14.5”)
DISTANCE: 1500MM (60”)
BETWEEN: 2000MM (80”)
3000MM (120”)
FLOOR TO CENTRE: 1175MM (46”)
SWING:
OVER BED 554MM (21.8”)
OVER CROSS-SLIDE: 370MM (14.5”)
IN GAP: 830MM (32.7”)
WIDTH IN FRONT OF FACEPLATE: 216MM (8.5”)
SPINDLE:
BORED TO PASS 90MM (3.5”)
NOSE TYPE: D1-11” CAMLOCK
MORSE TAPER: No.5 M.T
SPINDLE SPEEDS:
SELECTED IN FOUR: 18 - 666
RANGES OF FOUR: 27 - 890
SPEEDS IN EACH: 36 - 1195
RANGE: 38 - 1400
MOTOR (main):
9.3kw
BED:
WIDTH OF WAYS: 400mm (15.7”)
TYPE OF WAYS: Vee and flat
TOP SLIDE:
WIDTH: 100MM (4”)
TRAVEL: 190MM (7.5”)
TOOL SECTION: (1.25” X 1.25”)
CROSS SLIDE:
WIDTH: 203MM (8”)
LENGTH: 850MM (33.5”)
TRAVEL: 300MM (11.8”)
TAILSTOCK:
BARREL DIAMETER (NOMINAL): 95MM (3.7”)
TRAVEL: 145MM (5.7”)
MORSE TAPER: No.6 M.T
SET OVER: +-10mm (0.4”)
THREADS:
METRIC PITCHES: 0.2 - 14mm
IMPERIAL T.P.I.: 2 - 84 tpi
MODULE PITCHES: 0.2 - 3.5 module
DIAMETRAL PITCHES: 8 - 72 dp
LEADSCREW:
DIAMETER: 38mm (1.5”)
THREAD: 6mm Pitch or 4 TP I
FEEDS:
MATRIC (R10) SERIES): 0.04 - 2.8mm/rev
IMPERIAL (R10 SERIES): 0.0016 - 0.110 in/rev
CROSS FEEDS = APPROXIMATELY HALF LONGITUDINAL VALUES
OVERALL LENGTH:
1.5m (60”) MACHINE: 3045mm (120”)
2.0m (80”) MACHINE: 3545mm (140”)
3.0m (120”) MACHINE: 4545mm (180”)
WEIGHT:
1.5m (60”) MACHINE: 2700 kg (5950lb)
2.0m (80”) MACHINE: 2900 kg (6400lb)
3.0m (120”) MACHINE: 3800kg (8380lb)
OVERALL WIDTH:
1100mm (43.3”)
OVERALL HEIGHT:
1300mm (51.2”)
COOLANT FLOW
Local pick up or we can arrange for shipping! Please contact seller for detail!!!